Chris wanted to mount a Mitac Mio 168 PDA onto his Ducati 998, so using a Brodit holder and a Plastic mount RAP-B-149, he achieved this result.

Chris says "the only modification I had to make was to use a longer bolt on the clamp as the mounting point is slightly larger than 1 Inch. As the mounting point isn't as tall as the height of the clamp I am also using a cable tie around the arm as a safety feature until I'm confident it won't fall off - I have tested it at fast speed and it has been fine.

The Brodit mounting holes matched the holes in the diamond base plate !

If you wish to use these photos on your web site, please feel free".

If you are using a RAM Mounting System, send us some pictures and a brief paragraph of text so we can show other people how they can benefit from the RAM Mounting System!

Have a question on a RAM Mounting System ? Email us!